|
|
|
Current Product
Silicon Rubber Fiberglass Sleeving (Fiberglass inside rubber outside)
Properties
Silicon rubber fiberglass sleeving (fiberglass inside rubber outside) is made of the non-alkali fiberglass braided sleeving coated with silicon rubber after produced with the process of vulcanization in high temperature. It has excellent dielectric, softness feature and extreme elasticity. This kind of sleeving is widely used wiring insulation and mechanical protection for electrical machinery electric appliances, insulating protection of H class electrical machinery etc.
Size and tolerance
| ID (Inner Diameter, Unit: mm) |
Wall Thickness (Unit: mm) |
| Standard |
Tolerance |
D070501A |
D070501B |
| 1.0~2.5 |
±0.20 |
0.40±0.05 |
0.45±0.05 |
| 3.0~5.5 |
±0.30 |
0.40±0.05 |
0.50±0.05 |
| 6.0~7.0 |
±0.35 |
0.45±0.05 |
0.55±0.05 |
| 8.0~9.0 |
±0.40 |
0.50±0.05 |
0.60±0.05 |
| 10.0~12.0 |
±0.50 |
0.60±0.05 |
0.65±0.05 |
Data Form
| Properties |
Unit |
Value |
| Bending after heating |
- |
None cracking or detachment after 6h, 260℃ |
| Bending after cold |
- |
None cracking or detachment after 60m, -70℃ |
| Breakdown Voltage (Room Temp) |
KV |
D070501A |
D070501B |
| ≥4.0 |
≥7.0 |
| Insulation Class |
℃ |
180 (Class H) |
Structure
Specification
- 1. Length: 1000 mm, continuous length may be negotiated
- 2. Packing: In Carton or Bag
- 3. Min Qty: Not less than 400,000m in a lot, and 5,000m each size.
Note:The values noted in above technical specification are given only for our customers' reference and should not be used in writing specifications.
|
|
