F-DMD FDMD(6641)

Properties

F-DMD (6641) is made of two layers of non-woven laminated with one layer of polyester film, the different of DMD and F-DMD is on the adhesive resin, DMD uses the resin of class B while F-DMD us the resin of class F. It has good dielectric properties, high heat resistance and mechanical strength, is suitable for small and medium size electric motors as slot, phase, turn-to-turn, liner insulation of class F.

Data Form

Properties			Unit	Value
Nominal Thickness			mm	0.15	0.18	0.20	0.23	0.25	0.30	0.35	0.40
PET Film Thickness			mm	0.05	0.075	0.10	0.125	0.15	0.19	0.25	0.30
Thickness Tolerance			mm	±0.020	±0.025	±0.030	±0.030	±0.030	±0.035	±0.040	±0.040
Nominal Gram and Tolerance			g/m²	150±25	190±20	210±32	240±36	260±39	310±46	390±58	440±66
Tensile Strength	MD	unfold	N/cm	≥80	≥100	≥120	≥130	≥150	≥170	≥200	≥300
	MD	fold		≥80	≥90	≥105	≥115	≥130	≥150	≥180	≥220
	TD	unfold		≥80	≥90	≥120	≥115	≥130	≥150	≥180	≥220
	TD	fold		≥80	≥80	≥95	≥100	≥120	≥130	≥160	≥200
Elongation	MD		%	≥ 10					≥ 5
Elongation	TD		%	≥ 15					≥ 5
Breakdown Voltage	At room		KV	≥7	≥8	≥9	≥10	≥11	≥13	≥15	≥18
Breakdown Voltage	At 155 ± 2c		KV	≥6	≥7	≥8	≥9	≥10	≥12	≥14	≥17
Deflexion	MD		N	≥10	≥15	≥20
Deflexion	TD		N	≥15	≥20	≥30
Bonding Strength at room temp.			---	No delamination
Bonding Strength at 180±2c 10min			---	No delamination, No blister, No adhesive flow
Bonding Strength at wateriness			---	No delamination

Specification

1. Standard width: 1000mm, or slit into the width required Packing: In Carton
2. Min Qty: 1000kg each size in a lot
3. Shelf life: one year from the data of delivery. It can still be used if it is qualified by testing after one year according to above Technical Requirement.

Note:The values noted in above technical specification are given only for our customers' reference and should not be used in writing specifications.


	Shanghai Huin Industry Co.,Ltd Email：huin@jueyuancailiao.com.cn shhuin@foxmail.com 13917977217